Lanier LD235 Copy Reference Manual page 74

Copying
A
Make sure that the machine is in
copier mode.
B
Press the {User Tools/Counter} key.
2
C
Press [Copier / Document Server Fea-
tures].
D
Press [Stamp].
E
Press [User Stamp].
F
Press [Program / Delete Stamp].
G
Press [Program], and then press the
stamp number (1–4) you want to
program.
Note
❒ Stamp numbers with m already
have settings in them.
❒ If the stamp number is already
being used, the machine will
ask you if you want to over-
write it . Press [Yes] or [No].
H
Enter the user stamp name with
the letter keys on the display pan-
el. You can register up to 10 char-
acters.
I
Press [OK].
Reference
"Entering Text", General Set-
tings Guide
64
J
Enter the horizontal size of the
stamp with the number keys, and
then press [#].
K
Press [Vertical], and then enter the
vertical size in the same way as
J
step .
L
ZCAS100E
Place the original for user stamp
on the exposure glass, and then
press [Start Scanning].
The original will be scanned, and
the stamp will be registered.
Note
❒ Originals cannot be scanned
from the ADF when program-
ming the user stamp.
M
Press [Exit].
N
Press [Exit].
The display returns to the Copi-
er/Document Server Features
main menu.
O
Press [Exit].
Exits settings and gets ready to
copy.
To delete the user stamp
Important
❒ You cannot restore a deleted
stamp.
A
Make sure that the machine is in
copier mode.
B
Press the {User Tools/Counter} key.
ZCAS100E