Lanier LD235 Copy Reference Manual page 68

Copying
❖ Centre/Border
This mode erases both the centre
and edge margins of the original
image.
2
Reference
The erase width is set to 10 mm
(0.4") as a default. You can
change this setting with User
Tools.
p.97 "Erase Centre Width"
p.97 "Erase Border Width"
Note
❒ The relationship between the orig-
inal orientation and the erased part
is as follows:
L original
❒ 1: Erased part
❒ 2: 2–99 mm (0.1"–3.9")
58
GCCENT3E
K original
Border Erase
A
Press [Edit / Stamp].
B
Press [Erase].
C
Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width with
[n] and [o].
Note
❒ To change the value entered,
press [n] and [o] to set the
new value.
C Press [OK].