Preset Reduce/Enlarge; Create Margin Mode - Lanier LD235 Copy Reference Manual

Copying

Preset Reduce/Enlarge

You can select a preset ratio for copy-
ing.
2
❖ Base Point
The base point of Reduce/Enlarge
differs depending on how the orig-
inal is scanned. When the original
is placed on the exposure glass, the
upper left corner will be the base
point. When it is placed in the
ADF, the bottom left corner will be
the base point.
1.
Base point when placing on the
exposure glass.
2.
Base point when placing in the
ADF.
Reference
Related initial settings
p.95 "Shortcut R/E"
p.96 "R/E Priority"
28
A
Press [Reduce / Enlarge].
Note
❒ To select a preset ratio on the in-
itial display, press the shortcut
reduce/enlarge key and pro-
ceed to step
B
Press [Enlarge] or [Reduce].
C
Select a ratio, and then press [OK].
D
Place your originals, and then
press the {Start} key.

-Create margin mode

Use Create Margin to reduce the im-
age to 93% of its original size with the
centre as reference. You can assign
this function to a shortcut key on the
initial display. By combining it with
the Reduce/Enlarge function, you
can also provide the Reduce/Enlarge
copy with a margin.
Reference
GCKA031e
Related initial settings
p.94 "Copy Function Key: F1-F5"
p.96 "Ratio for Create Margin"
D
.