Lanier LD235 Copy Reference Manual page 26

Placing Originals
A
Press [Special Original].
1
B
Press [Mixed Sizes], and then press
[OK].
C
Align the rear and left edges of
the originals as shown.
1.
Place into the ADF
2.
Vertical size
D
Adjust the guide to the widest
original size.
E
Place the aligned originals face
up into the ADF.
F
Press the {Start} key.
16
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
❒ Paper that has a vertical length of
128–297 mm (5"–11") and a hori-
zontal length of 128–1,260 mm (5"–
49") can be placed with this func-
tion.
A
Press [Special Original].
B
CP19AE
Press [Custm Size Origi.].
C
Enter the horizontal size of the
original with the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key,
and then enter the value again.
D
Enter the vertical size of the origi-
nal with the number keys, and
then press [#].
E
Press [OK].