Encoder Profile; Pre-Defined Profiles; Changing A Profile - Bosch FLEXIDOME corner 9000 MP Software Manual

Camera Browser Interface
9.1

Encoder Profile

Profiles are rather complex and include a number of parameters
that interact with one another, so it is generally best to use the
pre-defined profiles. Only change a profile if completely familiar
with all the configuration options.
9.1.1

Pre-defined profiles

Eight definable profiles are available. The pre-defined profiles
give priority to different parameters.
–
–
–
–
–
–
–
–
The profiles for HD, MP and SD cameras are defined to match
the camera's capabilities.
9.1.2

Changing a profile

The pre-defined profiles can be changed (a pre-defined profile
can always be recalled by using the Default button).
To change a profile, select it by clicking its tab, then change the
parameters within that profile.
If a setting outside the permitted range for a parameter is
entered, the nearest valid value is substituted when the
settings are saved.
Bosch Security Systems
Profile 1
High resolution for high bandwidth connections
Profile 2
High resolution with lower data rate
Profile 3
High resolution for low bandwidth connections
Profile 4
Standard resolution for high bandwidth connections
Profile 5
Standard resolution with lower data rate
Profile 6
Standard resolution for low bandwidth connections
Profile 7
Standard resolution for DSL connections
Profile 8
Low resolution for mobile phone connections
Software manual
Encoder Settings | en
AM18-Q0649 | v5.8 | 2013.06
53