Table of Contents
Advertisement
Camera Browser Interface
5.2
Date/Time
5.2.1
Device date, time and zone
If there are multiple devices operating in the system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all devices are operating on the
same time. Device time, date and time zone are shown.
Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
5.2.2
Time server IP address
The camera can receive the time signal from a time server using
various time server protocols and then use it to set the internal
clock. The device polls the time signal automatically once every
minute.
5.2.3
Time server type
Select the protocol that is supported by the selected time
server. It is recommended that you select the SNTP server
protocol. This protocol provides high accuracy and is required
for special applications and future function extensions.
Select Time server if the server uses the RFC 868 protocol.
Bosch Security Systems
Click Sync to PC to apply the system time from your
computer to the device.
Enter the IP address of a time server.
Software manual
Basic Mode | en
AM18-Q0649 | v5.8 | 2013.06
29
Hide quick links:
Advertisement
Table of Contents
