Cameras With Alarm I/O - Bosch FLEXIDOME corner 9000 MP Software Manual

18 en | Operation via the browser
Set positions
To store the current view:
1.
2.
3.
To display a pre-set region of interest, click one of the buttons
numbered one to six.
3.1.5

Cameras with alarm I/O

(only for cameras with I/O connections)
The alarm input and output are displayed in the Digital I/O
panel next to the camera image.
The alarm symbol is for information and indicates the input
status of the alarm input:
–
–
The camera alarm output allows the operation of an external
device (for example, a light or a door opener).

AM18-Q0649 | v5.8 | 2013.06
Select a region of interest.
Click Set.
Click a number.
Active 1 = Symbol lights
Active 0 = Symbol not lit.
To operate, click the relay symbol.
– The symbol is red when the output is activated.
Software manual
Camera Browser Interface
Bosch Security Systems