Scene Mode Scheduler; Encoder Profile - Bosch AUTODOME IP starlight 7000i Series User Manual

28 en | Camera
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
5.2.3

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
5.3

Encoder Profile

For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
!
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
Note: In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections.
Notice!
All parameters combine to make up a profile and are dependent on one another. If you enter
a setting that is outside the permitted range for a particular parameter, the nearest permitted
value will be substituted when the settings are saved.
Profile name
Profile number
Profile 1
Profile 2
Profile 3
Profile 4
2019-11-21 | v0.5 |
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
Default Profile name
HD Image Optimized
HD Balanced
HD Bit Rate
Optimized
SD Image Optimized
Description
For an HD image, the video bit rate and frame
quality are adjusted to ensure that the picture
quality is the priority.
For an HD image, the video bit rate and frame
quality are adjusted to a median profile for
everyday use.
For an HD image, the video bit rate and frame
quality are adjusted to ensure that the bit rate is
the priority.
For an SD image, the video bit rate and frame
quality are adjusted to ensure that the picture
quality is the priority.
User Manual
AUTODOME IP starlight 7000i
Bosch Security Systems