Table of Contents
Advertisement
Camera Browser Interface
3.1.6
System Log / Event Log
The System Log field contains information about the operating
status of the camera and the connection.
Events such as the triggering or the end of alarms are shown in
the Event Log field.
3.1.7
Saving snapshots
Individual images from the video sequence that is currently
being shown on the Livepage can be saved in JPEG format on
the computer's hard drive.
3.1.8
Recording video sequences
Sections of the video sequence that is currently being shown on
the Livepage can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1.
2.
Play back saved video sequences using the Player from
Bosch Security Systems.
Bosch Security Systems
To view, filter and save these messages to a file, click
in the top right-hand corner.
To clear the log, click
the relevant field.
Click the camera icon
–
The storage location depends on the configuration of
the camera.
Click the recording icon
–
Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
Click the recording icon again to stop recording.
Software manual
Operation via the browser | en
in the top right-hand corner of
to save a single image.
to record video sequences.
AM18-Q0649 | v5.8 | 2013.06
19
Hide quick links:
Advertisement
Table of Contents
