Camera; Installer Menu; Base Frame Rate; Camera Led - Bosch FLEXIDOME corner 9000 MP Software Manual

Camera Browser Interface
8

Camera

8.1

Installer Menu

8.1.1

Base frame rate

Select the base frame rate for the camera.
Note:
Shutter times and frame rates are affected by this value.
8.1.2

Camera LED

(only for cameras with a LED indicator)
Disable the Camera LED on the camera to switch it off.
8.1.3

Mirror image

Select On to output a mirror image of the camera picture.
8.1.4

Flip image

Select On to output an upside down camera image.
8.1.5

Reboot device

Click Reboot to restart the camera.
8.1.6

Factory defaults

Click Defaults to restore the factory defaults for the camera. A
confirmation screen appears. Allow 5 seconds for the camera to
optimize the picture after a mode reset.
Bosch Security Systems Software manual
Camera | en
AM18-Q0649 | v5.8 | 2013.06
43