Scene Mode Scheduler; Encoder Profile - Bosch NDP-5523-Z30L User Manual

AUTODOME IP starlight 5100i IR
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15.
Adjust the balance between noise reduction in a frame over frame averaging way, at the cost
of motion blur. The higher the value the more noise is removed at the cost of more blur in
moving parts of the scene to achieve a lower bitrate and vice-versa for lower values.
The optimum for most scenes is value zero.
Spatial noise filtering
Adjust the Spatial noise filtering level between -15 and +15.
Adjust the balance between noise reduction spatially every frame, at the cost of reduction of
small details. The higher the value the more noise is reduced at the cost of small details to
achieve a lower bitrate and vice versa for lower values.
The optimum for most scenes is value zero.
Note: When High dynamic range is set to HDR X - Extreme DR, a second column, Intelligent
Streaming dynamic offset, shows to the right of the input fields forSharpness level, Temporal
noise filtering, andSpatial noise filtering.
Intelligent streaming
The sharpness level, Temporal noise filtering and Spatial noise filtering can be automatically
adjusted here, through the encoder, for optimum intelligent streaming results.
Dynamic sharpness & noise filtering
Enable or disable the automatic adjustment of the encoder.
Priority encoder stream
Select stream 1, 2 or smart select as the priority stream for the encoder. The smart select
automatically selects the optimum stream.
6.2.3

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
6.3

Encoder Profile

For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
!
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
Note: In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections.
Bosch Security Systems
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User Manual
Camera | en 29
2023-01 | 1.2 |