10-Pin I/O Connector; Alarm And Trouble Output - Bosch AVIOTEC 8000i IR User Manual

28 en | Installation
–
–
Notice!
i
Use only PoE approved devices.
Power-over-Ethernet (PoE) can be connected at the same time as a 24V AC / 12-26V DC
power supply. If auxiliary power (24V AC / 12-26V DC) and PoE is applied simultaneously,
the camera draws its power from PoE by default, and seamlessly switches to auxiliary input
if PoE power fails.
When PoE power returns, the camera seamlessly switches back to PoE as its default power
source.
4.5.1.1 8-pin T568A
Pin
1
2
3
4
5
6
7
8
4.6

10-pin I/O connector

4.6.1

Alarm and Trouble output

The alarm contact assignment is shown in the figure below:
2023.10 | 02 | F.01U.414.168
Use STP Category 5e (or higher) cable with punch down connector.
Note: If needed, test the cable by putting the network cable tester in the RJ45 port.
Power can be supplied to the camera via the Ethernet cable compliant with the Power-
over-Ethernet standard and/or via the 24V AC / 12-26V DC auxiliary power.
8
2
6
4
T568A
White/Green
Green
White/Orange
Blue
White/Blue
Orange
White/Brown
Brown
7
1
3
5
User manual
AVIOTEC 8000i IR
Bosch Sicherheitssysteme GmbH