Sharp MX-M260 Service Manual page 63

46-18
Purpose Adjustment
Function
Used to adjust inclination for each exposure mode.
(Purpose)
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the current set value are highlighted.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Set the exposure level with the 10-key.
4. Press the [START] key.
Copying is started.
(Auto adjustment)
Item
1 AE AE
2 TEXT Character
3 TEXT/PHOTO Character/Photo
4 PHOTO Photo
5 AE(TS) AE(TS)
6 TEXT(TS) Character (TS)
Character/Photo
7 TEXT/PHOTO(TS)
(TS)
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
46-19
Purpose Adjustment
Function
Used to set the control method of the exposure mode.
(Purpose)
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The currently set value is highlighted beside the adjustment item.
2. Press the [START] key.
The display is shifted to the adjustment value entry menu.
3. Enter the adjustment value with the 10-key, and press the [START] key.
When the [SYSTEM SETTINGS] key is pressed, the display returns to
the original state (adjustment item selection menu).
Item
AE MODE Auto exposure mode*
1 (1:EXPOSURE (1: Priority on Image quality,
2:TONER) 2: Priority on toner consumption)
AE STOP(COPY) Auto exposure STOP mode
2 (0:FIXED (COPY)
1:REAL TIME) (0: Fixed, 1: Real-time)
AE STOP(FAX)
Auto exposure STOP mode (FAX)
3 (0:FIXED
(0: Fixed, 1: Real-time)
1:REAL TIME)
AE STOP(SCAN) Auto exposure STOP mode
4 (0:FIXED (SCANNER)
1:REAL TIME) (0: Fixed, 1: Real-time)
Photo mode
5 PHOTO MODE
(1: ED (Error diffusion) , 2: DT (Dither))
* Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX Japan to
Japan, the setup value becomes 1 (Default: Japan). If, on the con-
trary, it is changed from Japan to EX Japan, the set value becomes 2
(Default: EX Japan)
• If the auto exposure mode setup value is changed, the setup value of
SIM 46-30 (AE limit setup) is reset to the default value.
Setting
Content Default
range
Level 3.0
Level 3.0
Level 3.0
1-99 50
Level 3.0
Level 3.0
Content Default
2
0
0
0
2
MX-M260/M310/M260N/M310N SIMULATION 6 - 30
46-20
Purpose Adjustment
Function Used to set the exposure correction value of SPF/
(Purpose) RSPF for OC exposure.
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
Item Content
1 SPF EXPOSURE SPF
2 RSPF EXPOSURE RSPF
46-30
Purpose Setting
Function Used to set the AE and the limit value in AE
(Purpose) (Toner save).
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
If SIM 26-6 (Destination setup) and SIM46-19 (Auto exposure mode)
are changed, this setup is also changed to the default value accord-
ingly.
Item Setting range
1 AE
0-31
2 AE(TS)
46-31
Purpose Setting
Function Used to set the AE and the limit value in AE
(Purpose) (Toner save).
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
Item Setting range
1 AE
2 TEXT
0-2
3 TEXT/PHOTO
4 PHOTO
46-39
Purpose Setting
Function
Used to switch the FAX send image quality.
(Purpose)
Enter the set value with the 10-key.
Item Content
Original with pencil lines
0 HAIRLINE
and thin lines
1 PRINTER Printed original
Setting range Default
1-99 53
Default
0
Default
1
Setting range Default
0-1 0