Sharp MX-M260 Service Manual page 48

Item
ICCARDR/W NONE/MX-ECX2
NONE: When it is not installed, "- - - - - - - - - -" is displayed.
[ ]: Shows the product code in the list below.
No. Item
1 RSPF
2 Finisher
3 Job separator
4 1 tray paper feed unit
5 2 tray paper feed unit
6 PRINTER
7 PS3
8 NIC
9 SCANNER
10 FAX
11 Handset
*1: The number of installed units is displayed beside the model code.
For the tray, only the option tray is displayed.
22-11
Adjustment/setting/operation data output/check
Purpose
(display/print)
Function Used to display the FAX send/receive counter
(Purpose) (FAX reception and print counter).
Section FAX
Item Counter
Operation/procedure
Used to display the FAX send/receive counter.
FAX SEND PAGE/TIME
FAX RECEIVE PAGE/TIME
FAX OUTPUT
The counter display is in 8 digits.
Note: Executable only when the FAX is installed.
22-12
Adjustment/setting/operation data output/check
Purpose
(display/print)
Used to check the misfeed positions and the number of
Function misfeed at each position.
(Purpose) (When the number of misfeed is considerably great, it
can be judged as necessary for repair.)
Section RSPF
Item Trouble
Operation/procedure
Used to display the RSPF jam history data sequentially from the latest
one.
Forty RSPF jam histories are displayed sequentially from the latest.
Error code Name
RSPF paper in lead
DFD_ND
edge jam
RSPF paper in rear
DFD_ST
edge jam
RSPF paper out
RDD_ND
lead edge jam
RSPF paper out
RDD_ST
rear edge jam
RSPF duplex
JAM_REV
reverse jam
RSPF short size
ORG_SHORT
error
Display items
Model code
MX-RP10
MX-FN13
MX-TR11
MX-DE10 (*1)
MX-DE11 (*1)
MX-PB12
MX-PK10
STANDARD (Only SoftNic)
MX-NSX1
AR-FX7
AR-HN4
FAX send page and time
FAX receive page and time
FAX output (number of print)
Misfeed
Paper Reached/
Sensor name Not Reached to
the sensor
SPF P-IN
Not Reached
sensor
SPF P-IN
Reached
sensor
Reached,
SPF P-IN
P_OUT Not
sensor
Reached
SPF P-OUT Reached, P_IN
sensor passed (OFF)
Not Reached
SPF P-IN
(Paper after
sensor
reversing)
SPF P-IN Passed (OFF at
sensor JAM)
MX-M260/M310/M260N/M310N SIMULATION 6 - 15
Error code Name
RSPF long size
ORG_LONG
error
22-13
Adjustment/setting/operation data output/check
Purpose
(display/print)
Function
Used to display the CRUM type.
(Purpose)
Item Specifications
Operation/Procedure
Used to display the CRUM type.
Item Content
00 Not fixed.
01 AR-A
02 AR-B
03 AR-C
04 China
05 Japan
99 Conversion completed.
22-19
Adjustment/setting/operation data output/check
Purpose
(display/print)
Function Used to display the scanner counter in the network
(Purpose) scanner mode.
Section Network scanner
Item Counter
Operation/procedure
Used to display the scanner counter.
SCANMODE Scanner mode counter
The counter display is in 7 digits.
24
24-1
Purpose Data clear
Used to clear the misfeed counter, the misfeed history,
Function
the trouble counter, and the trouble history. (The
(Purpose)
counters are cleared after completion of maintenance.)
Section Memory
Item Counter
Operation/procedure
Jam/trouble counter is cleared individually. (The history of each
counter is deleted when clearing)
1. Select the counter to be cleared with the 10-key.
2. Press the [START] key.
The confirmation menu is shown.
3. Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
Item
1 JAM JAM counter/JAM history
2 SPF JAM RSPF JAM counter/RSPF JAM history
3 TROUBLE Trouble counter/Trouble history
Paper Reached/
Sensor name Not Reached to
the sensor
SPF P-OUT
Reached
sensor
SPF P-IN
Reached
sensor
Content