Sharp MX-M260 Service Manual page 60

Item
122mm/s normal paper N1
39 +V2S-F (122) +V2 single surface. Duplex
(Front)
122mm/s normal paper N1
40 +V2S-R (122)
+V2 Duplex (Back)
122mm/s normal paper N2
41 +V1SS-F (122)
+V2 Duplex (Back)
122mm/s normal paper N2
42 +V1SS-R (122) +V1 single surface. Duplex
(Front)
122mm/s normal paper N2
43 +V2SS-F (122)
+V1 Duplex (Back)
122mm/s normal paper N2
44 +V2SS-R (122) +V2 single surface. Duplex
(Front)
122mm/s thick paper > LTR
45 +V1 THICK (122)
+V1
122mm/s thick paper > LTR
46 +V2 THICK (122)
+V2
+V1 THICK S 122mm/s thick paper t LTR
47
(122) +V1
+V2 THICK S 122mm/s thick paper t LTR
48
(122) +V2
122mm/s thin paper > LTR
49 +V1 THIN (122)
+V1
122mm/s thin paper > LTR
50 +V2 THIN (122)
+V2
122mm/s thin paper t LTR
51 +V1 THIN S (122)
+V1
122mm/s thin paper t LTR
52 +V2 THIN S (122)
+V2
122mm/s label paper > LTR
53 +V1 LABEL (122)
+V1
122mm/s label paper > LTR
54 +V2 LABEL (122)
+V2
+V1 LABEL S 122mm/s label paper t LTR
55
(122) +V1
+V2 LABEL S 122mm/s label paper t LTR
56
(122) +V2
57 +V1 OHP (122) 122mm/s OHP > LTR +V1
58 +V2 OHP (122) 122mm/s OHP > LTR +V2
59 +V1 OHP S (122) 122mm/s OHP t LTR +V1
60 +V2 OHP S (122) 122mm/s OHP t LTR +V2
+V1 POSTCARD 122mm/s postcard/envelope
61
(122) > 100mm +V1
+V2 POSTCARD 122mm/s postcard/envelope
62
(122) > 100mm +V2
+V1 POSTCARD 122mm/s postcard/envelope
63
S (122) t 100mm +V1
+V2 POSTCARD 122mm/s postcard/envelope
64
S (122) t 100mm +V2
44-40
Purpose Setting
Used to set the time from the start of the main motor
Function
rotation (Ready) to the start of toner supply in previous
(Purpose)
rotation after turning on the power.
Operation/procedure
Enter the set value with the 10-key, and press the [START] key.
Set the toner supply previous rotation time.
Setting range 1-99 (sec)
Default 4 (sec)
Setting Default
Content
range *1
5-30 14
5-30 12
5-30 5
5-30 5
5-30 14
5-30 12
5-30 5
5-30 10
5-30 5
5-30 12
5-30 5
5-30 12
5-30 5
5-30 12
5-30 5
5-30 12
5-30 5
5-30 12
5-30 5
5-30 8
5-30 5
5-30 12
5-30 5
5-30 16
5-30 5
5-30 16
MX-M260/M310/M260N/M310N SIMULATION 6 - 27
46
*2
46-2
Purpose Adjustment
Function
Used to set the exposure level in each exposure mode.
(Purpose)
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted. (Automatic adjustment)
The currently set value is highlighted beside the adjustment item.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
4. Press the [START] key.
Copying is started.
(Exposure mode)
Item
1 AE
2 TEXT
3 TEXT/PHOTO
4 PHOTO
5 AE(TS)
6 TEXT(TS)
7 TEXT/PHOTO(TS) Character/Photo (TS) Level 3.0
* Except for AE and AE (TS), only Level 3 can be set.
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
46-9
Purpose Adjustment
Used to adjust the shift amount and the inclination
Function
value for each level (1 to 5) of the exposure mode
(Purpose)
(Text).
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
4. Press the [START] key.
Copying is started.
(Exposure mode (Text))
Item
1 1.0 (SHIFT)
2 1.0 (GAMMA)
3 2.0 (SHIFT)
4 2.0 (GAMMA)
5 3.0 (SHIFT)
6 3.0 (GAMMA)
7 4.0 (SHIFT)
8 4.0 (GAMMA)
9 5.0 (SHIFT)
10 5.0 (GAMMA)
TS 1.0
11
(SHIFT)
1TS 1.0
12
(GAMMA)
TS 2.0
13
(SHIFT)
Density
Content
AE
Character Level 3.0
Character/Photo Level 3.0
Photo Level 3.0
AE (TS)
Character (TS) Level 3.0
Density
Setting
Content
Character level 1.0 (shift q'ty)
Character level 1.0 (slant)
Character level 2.0 (shift q'ty)
Character level 2.0 (slant)
Character level 3.0 (shift q'ty)
Character level 3.0 (slant)
Character level 4.0 (shift q'ty)
Character level 4.0 (slant)
Character level 5.0 (shift q'ty)
Character level 5.0 (slant)
Character (TS) level 1.0
(shift q'ty)
Character (TS) level 1.0
(slant)
Character (TS) level 2.0
(shift q'ty)
Setting
Default
range
1-99 50
Default
range
1-99 22
1-99 44
1-99 36
1-99 47
1-99 50
1-99 50
1-99 61
1-99 55
1-99 72
1-99 60
1-99 22
1-99 44
1-99 36