Toshiba G8000U Series Operation Manual page 43

TOSHIBA
[
(2) Table 11.6 shows the
After recharging mode is changed to equalize, the mode will automatically b
changed back to float charge after a programmed duration has elapsed. So,
manual mode change is not usually required.
Step
Make sure EQUAL
CHARG E LED is O n .
2 Press FLOAT IEQUAL
button [(6) i n Figure
9 .2 . 1 on page 25] for
0.5 sec .
- Change completed .
manual
procedure to change from equalize charge to float charge.
Table 1 1 .6 Changing From Equal ize Charge to Float Charge
Procedu re
FLOAT CHARG E LED is O n , EQUAL CHARG E LED is Off.
LCD/LE D Status
UPS SUPPLY
AC-VO 480[V]
AC- I O 50[%]
UPS SUPPLY
AC-VO 480[V]
AC- I O 50[%]
- 42 -
6F3H1048
j