0 .2.2 Fault Display; 0.2.3 Warn Ing Display - Toshiba G8000U Series Operation Manual

TOSHIBA
1 0.2.2 Fau lt Display
The Fault Display screen indicates the fault records until they are reset.
LCD Screen
I n dication of no fault
FAULTS
I n dication i f fau lts recorded
FAULTS
1 FUSE BLOWN
09-09-02 08:05:30
l
ANOT H E R ITEM
* The fault records wi l l remain in the memory until the reset button is pressed for at least 5
seconds, even after the actual cause of the fault has been resolved. Note that the fault
records are not deleted when the U PS is tu rned off.

1 0.2.3 Warn ing Display

The Warning Display screen indicates the warning records until they are reset.
LCD Screen
I n dication of no warn ing
FAULTS
I n dication i f warn ings recorded
FAULTS
1 UPS OVER LOAD
09-09-02 08:05:30
l
ANOT H E R ITEM
Table 1 0.3 Fau lt Display Screen
&
WAR N I N GS
NO FAULT
NO WAR N I N G
&
WAR N I N GS
Table 1 0.4 Warn ing Display Screen
&
WAR N I N GS
NO ALARM
NO WAR N I N G
&
WAR N I N GS
Description
This screen is displayed if there is no fault
recorded , or after the reset button is pressed .
A fault record is shown with time stamp if
recorded .
An arrow shows up with another record which
can be scrolled by pressing the
Description
This screen is displayed if there is no warn ing
recorded , or after the reset button is pressed .
A warn ing record is shown with time stamp if
recorded .
An arrow shows up with another record which
can be scrolled by pressing the
- 33 -
6F3H1048
� V
buttons.
� V
buttons.