Toshiba G8000U Series Operation Manual page 30

TOSHIBA
No.
@
LCD
@
U PS S U P PLY LED
@
WARN I N G LED
FAU LT LED
@
AC I N PUT LED
@
R ECTI F I E R LED
@
I NVERTER LED
@
AC OUTPUT LED
BATTE RY LED
FLOAT CHARG E LED
@
EQUALIZE CHARG E LED
D I SCHARG E LED
@
BYPASS I N PUT LED
U PS LED
BYPASS LED
Table 1 0. 1
Name
LCD indicates operation procedu re , measured data and
warn ings/faults.
Detailed i n section 1 0 .2 " LCD Display. "
Tu rned on wh ile the i nverter is o n . Flashes d u ring start-up
or stop procedu re .
Normally off. Tu rned on with warn ings, flashes with AC
i nput abnormal ity.
Normally off. Tu rned on with fau lts .
Normally on with regular AC i nput. Flashes with AC
i nput under-voltage (85%) .
Tu rned on after DC caps are charged up through the
rectifier.
Flashes d u ring start-up or stop procedu re . Tu rned on after
the i nverter starts up, and d u ring available.
Tu rned on with AC output fed by either the bypass or
i nverter sources.
Tu rned on with battery connected. (Aux-contact on)
Tu rned on d u ring float charge.
Tu rned on d u ring equal ize charge or protection charge
with battery OH contact ope n .
Tu rned on d u ring battery discharge.
Normally on with regular bypass i nput. Flashes with bypass
under-voltage (85%) .
Tu rned on d u ring U PS Supply.
Tu rned on d u ring Bypass Supply.
- 29 -
LCD/LE D Legend
Function
6F3H1048