Set-Up; Accessories; Items To Be Prepared By User; Connecting The Printer Cable - Kyocera KM-2540 Operation Manual

2

Set-up

Accessories

•
•

Items to be prepared by user

•
•
Note
When using a USB, 10Base-T or 100Base-TX cable, prepare a shielded cable.

Connecting the printer cable

When using this machine as a local printer, use a USB cable as a printer cable to connect this
machine to a computer.
1
Connect the printer cable to the USB interface
connector located on the rear right of this machine.
2 Connect the other side of the printer cable to the USB interface of the computer.

Connecting the network cable

When using this machine as a network printer, use a network cable (10Base-T or 100Base-TX) to
connect this machine to a network.
1 Turn the main power switch located on the rear right of
this machine OFF (
CD-ROM: 1 pcs.
Operation Guide (this document)
For USB connection of the printer: USB2.0 compatible cable (based on High-Speed USB,
shorter than 5.0 m)
For network connection of the printer: Network cable (10Base-T or 100Base-TX)
).
3