Normal Self-Diagnostic Mode (Level 1) - Oki C5650 Maintenance Instructions Manual

5.3.2.2 Normal self-diagnostic mode (Level 1)

The menus of the normal self-diagnostic mode are indicated below.
Item Self-diagnosis Menu
1 Switch scan SWITCH SCAN
test
2 Motor clutch MOTOR&CLTCH
test TEST
3 Execution of TEST PRINT
test print
4 Color drift REG ADJUST TEST
correction test
5 Density DENS ADJ TEST
correction test
6 Indication of CONSUMABLE
consumable STATUS
part counter
7 Indication of PRINTER STATUS
consumable
part
continuance
counter
8 Factory/ FACTORY MODE
Shipping mode
switching
9 Check of Fuse SET
status
10 Engine SENSOR SETTING
parameter
setup
Indication of LED
11 LED HEAD DATA
head serial
number
43827101TH Rev.2
Table 5-3 Maintenance Utility Adjustment Items
Adjustment
Checking of inlet sensor and switch
Operation test of motor and clutch
Print of test patterns built in PU
Judgment of good/bad color drift
correction mechanism.
Judgment of good/bad density
correction mechanism.
Indication of consumed state of
consumables
Indication of lifetime consumed state
of consumables
Switching between Factory mode
and Shipping mode
Indication of the status of each fuse
Setup of Enable/Disable of error
detection by various sensors
Indication of the serial number of
LED head data
Oki Data CONFIDENTIAL
Maintenance Utility
Not operable
Not operable
Not operable
Not operable
Not operable
Not operable
Not operable
No.3
No.30
Not operable
Not operable
Not operable
125 /