Irregular Operation Of The Device After Turning On The Power; Ram Check" Or "Initializing" Are Displayed; No Operation - Oki C5650 Maintenance Instructions Manual

(1-5)"RAM CHECK" or "INITIALIZING" are displayed

Confirmation Items
(1-5-1) Indications on the operator panel freeze.
Operator panel indications
Check to see if the option
RAM DIMM/HDD is used in
the CU PCB.
7.5.2.(2)

Irregular Operation of the device after turning on the power

(2-1)No operation

Confirmation Items
(2-1-1) Check of parts related to power supply
AC power supplied to the
printer
Voltage setting of low-voltage
power supply unit (100-V
system/230-V system)
5V and 24V power supplied to
the PU PCB
(2-1-2) Check of connections
Connected state of operator
panel
43827101TH Rev.2
Confirmation Tasks
The indication of "RAM CHECK" or "INITIALIZING" remains on
permanently.
Does the PCB operate after the RAM DIMM or HDD is
removed?
Check for a skew insertion or incomplete insertion.
Is the RAM DIMM/HDD a genuine part?
Correct the inserted state of the DIMM.
Confirmation Tasks
Check the supply voltage of the AC power.
Measure the supplied AC voltage.
Check the power supply settings of the printer in use.
(Check the short-circuit plug designed for switching of low-
voltage power supply setting [CN5]. Short-circuit plug
provided/not provided = 100-V system/230-V system.)
Check the power through the POWER connector of the PU
PCB.
4, 5, 6 pin: 24V
7 pin: 5V
8 pin: 0VL
1, 2, 3 pin: 0VP
Check the items of (1-1).
The operator panel needs to be detected and start operating, so
that the printer functions.
Oki Data CONFIDENTIAL
Action at NG
Replace the CU PCB.
Replace the optional
item, if necessary.
Action at NG
Supply AC power.
Set the low-voltage
power setting to the
proper values.
Replace the low-
voltage power supply.
Follow the description
of (1-1).
188 /