Confirmation Items
(6-2-4) Check of connections
Fuser motor drive cord
Fuser motor
(6-3)Paper exit jam occurs in a path route
Confirmation Items
(6-3-1) Check of operating state of motor
Fuser motor
43827101TH Rev.2
Confirmation Tasks
Check the connected state of the cord.
Check visually for any incomplete connection or skew insertion
of the DCHEAT connector of the PU PCB or any assembling
problem of the cord.
Confirmation Tasks
Conduct the Motor and Clutch Test of the self-diagnostic mode,
and check to see if the fuser motor operates normally.
Make this checking in the presence and absence of a load.
Oki Data CONFIDENTIAL
Action at NG
Correct the connection
properly.
Replace the cord with a
normal one.
Replace the fuser
motor.
Action at NG
Replace the PU PCB,
fuser motor, or fuser
unit. To use a new
fuser unit on a trial
basis, use FUSE KEEP
MODE of the System
Maintenance Menu.
209 /