4.2.19 Shaft Eject Assy(FU) / Shaft Eject Assy(FD) / Eject Sensor
(1) Remove the eject Assy. (See Subsection 4.2.13.)
(2) Free the two claws, and divide the Assy between guide into lower 1 and guide eject upper
2.
(3) Remove gear idle eject 3, and disassemble shaft Assy eject (FU) 4 and shaft Assy eject (FD)
5 and Gear eject 6.
(4) Remove lever eject sensor 7 and eject sensor 8.
Figure 4.2.19 Shaft Eject Assy(FU) / Shaft Eject Assy(FD) / Eject Sensor
43827101TH Rev.2
4
8
6
5
Claws
7
Oki Data CONFIDENTIAL
3
2
1
92 /