Functions Of User's Maintenance Menu; Maintenance Menu (For End Users) - Oki C5650 Maintenance Instructions Manual

5.3 Functions of user's maintenance menu

5.3.1 Maintenance menu (For end users)

There is a maintenance menu category among the normal menu categories. (Different from the
system maintenance menus)
The items that can be set under this menu are indicated below.
Maintenance Menu
Category
Item (Upper Display) Value (Lower Display)
Maintenance MENU RESET
Menu
SAVE MENU
RESTORE
MENU
POWER SAVE
PAPER BLACK
SET
PAPER COLOR
SET
TRNSPR BLACK
SET
TRNSPR
COLOR SET
SMR SETTING
43827101TH Rev.2
Operator Panel Display
EXECUTE
EXECUTE
EXECUTE
ENABLE
DISABLE
0
+1
+2
-2
-1
0
+1
+2
-2
-1
0
+1
+2
-2
-1
0
+1
+2
-2
-1
-3
-2
-1
0
+1
+2
+3
Values in shaded areas are initial settings.
Function
Initializes menu settings.
Stores current menu settings.
Changes menu settings to stored ones. Displayed only
when menu settings have been stored.
Sets Power Save mode enabled/disabled. Shift time to
enable Power Save mode can be changed using
"POWER SAVE SHIFT TIME" on "SYSTEM CONFIG.
MENU".
Corrects print nonuniformity due to temperature variation.
With faded images, change the value.
With scattering or snowing images in print output of high
print density, decrement the value. With faded images in
print output of high print density, increment the value.
Corrects print nonuniformity due to temperature variation.
With faded images, change the value.
With scattering or snowing images in print output of high
print density, decrement the value. With faded images in
print output of high print density, increment the value.
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is
blurred.
f an output shows a scattered- or snowing-like
phenomenon in a high-density print part, decrement the
value. If an output is blurred, increment the value.
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is
blurred. If an output shows a scattered- or snowing-like
phenomenon in a high-density print part, decrement the
value. If an output is blurred, increment the value.
To correct variations in print results caused by
temperature/humility conditions and difference in print
density/frequency. Change the setting when print quality
is uneven.
Oki Data CONFIDENTIAL
120 /