KVH Industries antenna system User Manual page 90

4. The System Diagnostics menu appears. Highlight
the LNB Type button and press SELECT.
System Diagnostics
54-0287
5. Highlight "Stacked" from the pop-up submenu
and press SELECT.
LNB Type Submenu
LNB Type
Unstacked
6. With the LNB Type button still highlighted, press
SELECT and verify that a check mark appears
next to "Stacked." Press SELECT again to exit.
7. Highlight the Install tab (shown on page 9.10).
8. Highlight the Dish Type button and press
SELECT.
Troubleshooting
Stacked
9.11