KVH Industries antenna system User Manual page 6

Receiver Activation
NOTICE: This product will NOT work correctly
unless you follow the procedure below.
Before you can start watching satellite TV via
TracVision, the receiver must be activated. Once your
antenna system is fully installed, follow the steps
below to activate the receiver.
1. Ensure your antenna has a clear view of the sky
then turn on your TracVision system and tune to
the preview channel (channel 100).
2. Locate your red Activation Card.
3. Call KVH's Activation Department at:
1-866-551-8004
(24 hours a day, 7 days a week)
Please have the antenna and receiver
serial numbers handy when calling to
activate. The serial numbers are noted on
the red Activation Card. The receiver
cannot be activated without these numbers.
54-0287
4. After activation is complete, KVH's Activation
Department will provide an access card number,
receiver ID number, Hughes serial number, and
model number. Enter these numbers in the
associated boxes on the red Activation Card.
Technical Support
The TracVision system has been designed with
durability and low maintenance in mind. If you
experience an operating problem or otherwise require
technical assistance, please call your local authorized
TracVision dealer/installer. If an authorized
dealer/installer is not located nearby, contact KVH
Technical Support directly:
1-401-847-3327
Phone:
E-mail: techs@kvh.com
Internet: www.kvh.com/help
Technical Support
v