KVH Industries antenna system User Manual page 21

TracVision Receiver User's Guide
Turning On the Antenna
If the antenna is turned OFF, press the SAT button
then the PWR button on the remote control to turn
the antenna ON.
1. The receiver beeps twice and sends
power to the antenna.
2. The receiver's crescent-shaped
Antenna Power light illuminates.
3. The antenna powers up and
searches for the satellite signal. You
might hear slight mechanical noise as
the antenna's internal motors operate.
4. The antenna finds and starts
tracking the DIRECTV satellite. The
antenna should become relatively quiet
while tracking the satellite.
2.8
Turning On the Antenna
Press SAT
then PWR...
Antenna Power
Light ON
Beeps Twice
Power
Antenna ON
54-0287