KVH Industries antenna system User Manual page 20

Kvh industries antenna system user's guide
Table of Contents

Advertisement

After 30-Second System Startup
Immediately following the 30-second system startup,
the antenna will either power off or remain powered
on, based on its last setting.
Whenever you turn off power to the receiver, the receiver
saves the current status of the antenna (turned ON or
turned OFF); and whenever you restore power, the system
reverts to that setting after 30 seconds.
TracVision Antenna Is OFF:
1. The receiver beeps once and removes power
from the antenna. The receiver's crescent-shaped
front panel Antenna Power light stays off.
2. The antenna stops tracking the satellite and shuts
down.
TracVision Antenna Is ON:
1. Following the 30-second system startup, the
antenna stays powered on and continues to track
the satellite.
2. The receiver does not beep, but its crescent-
shaped Antenna Power light illuminates.
54-0287
After Startup
After 30 Seconds
Antenna Power
Light OFF
Antenna Power
After 30 Seconds
Light ON
Getting Started
Antenna OFF
OR
Antenna ON
2.7

Advertisement

Table of Contents
loading

Table of Contents