Maintenance - Mira Advance ATL J97A Installation Manual

Tradesperson Maintenance - Inlet Filter Cleaning/Replacing
Read the section 'Important Safety Information' first.
1. Electrical and water supplies to
appliance are turned off.
3. Hold a spanner or other suitable grips
across flats of the metal connector.
Unscrew filter using another spanner
as shown. Clean or replace filter as
necessary. Refit filter making sure
it is screwed fully home. Do not
overtighten.

MAINTENANCE

2. Remove cover screw, cover and
4. Make sure all plumbing connections
35
splash guard. Disconnect ribbon
cable from cover
are sealed before restoring water
supply. Re-prime appliance (refer
to 'Installation') before restoring
electricity supply. Refit splash guard,
ribbon cable and cover.