Table of Contents
Advertisement
Patents and Design Registration
Design Registration:
Patents:
IMPORTANT SAFETY INFORMATION
Installation must be carried out in accordance with these instructions, and must be
conducted by designated, qualified and competent personnel.
WARNING!
Follow all warnings, cautions and instructions contained in this guide, and on or
inside the shower.
1.
This shower can deliver scalding temperatures if not installed or
maintained in accordance with the instructions, warnings and cautions
contained in this guide and on or inside the appliance.
2.
This product is suitable for installation within Zone 1 and is rated IPX4.
3.
Isolate the electrical and water supplies before commencing installation. The
electricity must be turned off at the mains and the appropriate circuit fuse
removed, if applicable.
4.
Mains connections are exposed when the cover is removed.
5.
Refer to the wiring diagram before making any electrical connections.
6.
Make sure all electrical connections are tight, to prevent overheating.
7.
Make sure that any pipework that could become frozen is properly insulated. The
shower unit must not be fitted where it may be exposed to freezing conditions.
8.
The water supplies to this product must be isolated if the product is not to be
used for a long period of time. If the product or pipework is at risk of freezing
during this period they should also be drained of water.
9.
DO NOT operate this appliance if it is frozen. Isolate the electrical supply and
allow to thaw. Check for leaks before reconnecting the electrical supply.
10. DO NOT install the product in a position in which service access is restricted
11. If the shower is dismantled during installation or servicing then upon completion
the product must be inspected to ensure there are no leaks.
Recommended Usage
Domestic
Light Commercial
Heavy Commercial
Healthcare
000738141: 0003, 0006, 0007, 0009
GB: 2269466, 2270370, 2298478, 2298479, 2298481
5
.
Hide quick links:
Advertisement
Table of Contents
