Maintenance; General; Lubricants; Cleaning - Mira Discovery Installation And User Manual

MAINTENANCE

General

The Mira Discovery Shower Control is designed to be maintenance free, as such
there are no serviceable parts in the cartridge. However regular cleaning will keep the
shower in pristine condition, refer to section: 'Maintenance, Cleaning'.
Filters are fitted to the inlets of the mixer to protect the cartridge and will give many
years of trouble free showering. Filters should be checked at yearly intervals and
cleaned or replaced to maintain optimum shower performance. Refer to the section
'Maintenance, Filters'.
If you require a Mira trained engineer or agent, refer to the section 'Customer Service'.

Lubricants

Silicone-only based lubricants can be used to assist in refitting.
Caution! Oil based or other lubricant types, may cause rapid deterioration of seals.

Cleaning

Warning! Many household cleaners contain abrasive and chemical substances, and
should not be used for cleaning plated or plastic fittings. These finishes should be
cleaned using a mild washing up detergent or soap solution, rinsed and then wiped
dry with a soft cloth.
Do not use descalents on this product.

In-service Tests

The principal means for determining the continuing satisfactory performance of the
mixing valve is the in-service test.
Follow the procedure detailed in the flow diagram "In-service Test Procedure".

Frequency of In-service Tests

Commercial (non-domestic installations)
Check for correct blend setting every 6 months.
Follow the procedure detailed in the flow diagram "In-service Test Procedure",
every 12 months.
30
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818