Wireless Installation; Wireless Signal Schematic Diagram - Mira Advance ATL J97A Installation Manual

Wireless Installation (Flex Extra Wireless J97P model only)
1. The wireless version of the Instantmatch by Whale® Pump is connected to the
Mira Advance ATL 'Extra' Wireless shower model with a radio signal.
2. For optimum signal strength, site the pump transformer as close to the shower
as possible. See the 'Wireless Signal Schematic Diagram' for shower and
drain pump positions.
3. Metal objects such as steel baths or sinks, cold water storage tanks, hot water
cylinders, foil lined plaster board walls, radiators and even thick brick walls, can
all reduce the operational range of any radio controlled product dramatically.
Interference from other radio signals can also reduce the ability of the shower
and drain pump to register or communicate. These may include; mobile phones,
radio control boiler thermostats, wireless broadband routers, radio control toys,
cordless phones, remote outdoor weather stations etc.
If you encounter difficulty registering the drain pump to the shower make sure
all other radio interference is temporarily switched off.
Note! Failure to follow these guidelines can result in poor, intermittent or
complete failure to communicate with the drain pump.
4. Install the drain pump in accordance with the separate installation guide
supplied.
5. Register the drain pump to the shower. See section 'Drain Pump Registration'.
Drain Pump
Transformer
Consumer
Unit

Wireless Signal Schematic Diagram

(for Instantmatch by Whale® Pump)
Drain Pump
to waste
Shower
19
Bathroom