Konica Minolta magicolor 4690MF Service Manual page 166

Field Service Ver. 1.0 May 2008
J. BONJOUR
Function • Select whether or not to use the bonjour setting.
• To use when operating under the bonjour service environment.
Use • If [ENABLE] is selected, Bonjour is enabled.
• If [DISABLE] is selected, Bonjour is disabled.
• The default setting is ENABLE.
Setting/
procedure
K. IPP
Function • Select whether or not to enable IPP.
• If [ENABLE] is selected, IPP is enabled.
Use
• If [DISABLE] is selected, IPP is disabled.
• The default setting is ENABLE.
Setting/
procedure
L. SLP
Function • Select whether or not to enable SLP.
• If [ENABLE] is selected, SLP is enabled.
Use
• If [DISABLE] is selected, SLP is disabled.
• The default setting is ENABLE.
Setting/
procedure
M. SNMP
Function • Select whether or not to enable SNMP.
• If [ENABLE] is selected, SNMP is enabled.
Use
• If [DISABLE] is selected, SNMP is disabled.
• The default setting is ENABLE.
Setting/
procedure
N. SPEED/DUPLEX
Function • Sets the communication speed and method of network.
Use • To set the network communication speed and method.
• The default setting is AUTO.
Setting/
"AUTO"
procedure
100BASE-TX FULL
DISABLE
DISABLE
DISABLE
DISABLE
10BASE-T FULL
100BASE-TX HALF
"ENABLE"
"ENABLE"
"ENABLE"
"ENABLE"
10BASE-T HALF
11. Utility mode
123