Konica Minolta magicolor 4690MF Service Manual page 398

Field Service Ver. 1.0 May 2008
5.2.7 ADF LOOP
Function • To adjust the length of the loop to be formed in paper before the registration rollers.
Use • When an original misfeed or skew occurs.
Adjustment
• The loop value increases by the entered + value and decreases by the entered - value.
Instructions
• The default setting is 0.
Adjustment
• -5.0 (-5.0 mm) ~ "0 (0 mm)" ~ +5.0 (+5.0 mm)
Range
• Step: 0.5 mm
1. Enter the [ADJUST] menu in the service mode.
Setting/ 2. Select [ADF LOOP] and press the Select key.
procedure 3. Select [ADJUST] and press the Select key.
4. Using the / key, change the setting value and then press the Select key.
5. SERVICE MODE
23