TRENDnet User's Guide
Physical Descriptions
1. Mounting base
2. Horizontal stand
3. Vertical stand
4. Lower dome
5. Cables
6. Infra-red lamps
7. Lens
8. Black Liner
9. Safety rope
© Copyright 2014 TRENDnet. All Rights Reserved.
DC Power
10/100 PoE
12V DC 1A
Network Port
(Optional)
Angle Adjustment
Loosen the tilt lock screws, adjust the tilting position in a range from 15 to
90, and tighten the tilt lock screws.
Reset Button
Push and hold the reset button then power on the camera. Keep holding the
reset button for more than 10 seconds to reset configuration to factory
default.
TV-IP311PI
Screw
Reset Button
4