System Requirement; Physical Description - TRENDnet TV-IP300 User Manual

System Requirement

Networking
Local Area Network:
10Base-T Ethernet or 100Base-TX Fast Ethernet.
Accessing the Camera
For Web Browser Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP
CPU: Intel Pentium III 350MHz or above
Memory Size: 128MB
Resolution: 800x600 or above
Microsoft® Internet Explorer 5.0 or above
For IPView SP Application Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP.
CPU: Intel Pentium III 650MHz or above
Memory Size: 256MB
Resolution: 800x600 or above
NOTE: When you connect multiple cameras and monitor their
images synchronously, it is recommended to use a high
performance system, such as a Pentium 4 2.4GHz PC.
10

Physical Description

This section describes the externally visible features of the
camera.
Front Panel
④
Lens Assembly
1. Link LED
The Link LED is positioned on the right side of the camera's lens
while facing the camera.
A steady Red light confirms that the camera has good connection
to LAN connectivity.
Dependent on the data traffic, the LED will begin to flash to
indicate the camera is receiving/sending data from/to the LAN or
network.
①
Link LED
②
Power LED
③
Internal MIC
11