TRENDnet TV-IP311PI User Manual page 35

TRENDnet User's Guide
PPPoE
Setup PPPoE (ADSL) connection to connect your camera with your ISP,
Internet Service Provider.
PPPoE (ADSL)
Enable PPPoE: Check this box to enable PPPoE connection.
Dynamic IP: The IP address assigned by ISP
User Name: Enter the account name.
Password: Enter the password.
Confirm: Enter the password again.
Click Save to save the changes
© Copyright 2014 TRENDnet. All Rights Reserved.
SNMP
SNMP Settings allows you to assign the contact details, location, community
name and trap settings of SNMP. This is a networking management protocol
used to monitor network-attached devices. SNMP allows messages (called
protocol data units) to be sent to various parts of a network. Upon receiving
these messages, SNMP compatible devices (called agents) return data
stored in their Management Information Bases.
TV-IP311PI
35