TRENDnet TV-IP311PI User Manual page 13

TRENDnet User's Guide
Fix the mounting base on the ceiling with the screws that come with the
package. Route the cables into the ceiling or route it through the hole on
the side.
Cable
Loosen the tilt lock screws, adjust the tilting position in a range from 15 to
90, and tighten the tilt lock screws.
© Copyright 2014 TRENDnet. All Rights Reserved.
Fasten the lower dome back to the camera evenly and tightly. This
step is important to block the water and dust.
Screw
TV-IP311PI
13