Hardware Installation; Mount Your Camera; Waterproof Cap - TRENDnet TV-IP311PI User Manual

TRENDnet User's Guide

Hardware Installation

Cabling
It's recommended that the wiring the cable in your home or office by a
professional. If you already have the cable deployed, make sure the cable
and the connectors meet the category 5 Ethernet cable standards. At least 2
pairs of twisted lines are required for power and data. Poor cable quality
may cause unexpected problems. Testing your cable or running a new cable
is suggested for new camera installation.

Waterproof cap

The TV-IP311PI itself is IP66 grade water and dust proof. There is a set of
network cable water proof caps that comes with the package as well. Run
your cable going through the accessories, and then crimp the cable with an
RJ45 module. Plug in the network cable and then tighten the waterproof cap
to prevent water running into camera through the cable.
© Copyright 2014 TRENDnet. All Rights Reserved.

Mount your camera

Try out the best camera video shooting position. Drill the screw holes and
the cable hole if necessary with the drill template comes with the package.
Loosen the screws with the torx screw driver which comes with the package
to remove the lower dome.
TV-IP311PI
12