Table of Contents
Advertisement
5.3
OPERATION MODE
The inverter can operate in this mode. Operation data or faults can be displayed. Each time when
depressing
operator changes to the fault display automatically and returns to the previous display by the
[> RESET] key.
Description
Displays Operation.
POWER
1
ON *
Select Operation.
Displays frequency reference
value setting.*1
Displays output frequency.*1
Displays output current.*1
Displays output voltage.*1 *2
U2− VV *3
U3− VV *3
U1− VV *3
*1: Data to be displayed after the power supply ON can be selected by setting constant o1−02
(monitor selection after power up) among frequency reference value, output frequency,
output current or selected monitor. (Initial setting is set to the output voltage monitor. )
*2: Another item to be displayed instead of output voltage can be selected by setting constant
o1−01 (monitor selection).
*3: For items to be displayed such as U1−jj , U2−jj and U3−jj , refer to Table A−3
"Monitor Constants List".
or
key, an item to be monitored is changed. If any fault occurs, the digital
Table 16
Typical Operation in Operation Mode
Key Sequence
MENU
DATA
ENTER
5
SETTING OPERATION CONDITIONS
Digital Operator Display
** Main Menu **
Operation
Frequency Ref
U1−01 = 60.00 HZ
Output Freq
U1−02 = 60.00 HZ
Output Current
U1−03 = 12.3 A
Output Voltage
U1−06 = 575.0 VAC
Function U2
Fault Trace
Function U3
Fault History
Function U1
Monitor
Remarks
To
set
frequency
reference,
depress the [DATA/ENTER] key.
The value to be set blinks.
(This setting is enabled at fre-
quency reference from the digital
operator or when using multi−
step speed commands d1−01 to
09.)
47
Hide quick links:
Advertisement
Table of Contents
