Table of Contents
Advertisement
Relay Broadcast Report
The relay key station (hub) can send a confirmation report to
the relay initiating station when the relay fax session is
complete.
This confirmation report is called the Relay Broadcast
Report.
To receive the report, the telephone number of the relay
initiating station must be programmed into the specified
Auto Dial location. For your machine, that location is Auto
Dial 99 (Relay Report Number).
!
Be sure to program the number in the format the relay
key station uses for dialing. For example, be sure to
include the access digit, if required.
The Relay Broadcast Report shows:
the page count of the original fax
the location identification of each destination machine
the relay key station (hub) communicated with during the
relay fax session
the page count of each fax sent to each destination
machine
the results of each destination fax session
|
User's Manual
131
Advertisement
Table of Contents
