Relay Request Reception Report - Konica Minolta FK-102 User Manual

Relay Request Reception Report

This report is printed out automatically when a document for which relay has been requested is
distributed to members of a group as a relay station.
Automatic printout can be set to ON or OFF with [Relay Request Rx report] at [Report output set]
of Key Operator mode. For details, see "Report Output set" (p. 10-27).
REMOTE STATION: .....The names of the remote stations to which the document has been
START:.........................The time at which communication started.
TIME: ...........................The required time for the communication is shown.
Pages:..........................The number of pages transmitted.
RESULT: ......................OK
REMARKS: ..................RLY and Relay BOX no. are shown.
11-22
relayed and distributed are shown.
Shown when communication ended normally.
S-OK Shown when [STOP/CLEAR] pressed to terminate com-
munication.
NG Shown when a communication error has occurred.
Busy Shown when unable to complete communication due to
the line being busy.
No ans Shown when the remote station being called did not
answer.
TEL Shown when there has been an incoming telephone call.
Cont Shown when an error has occurred and the FK-102 has
switched to error page redialing.
M-full Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF Shown when the power switch is turned off.