Connecting To The Second Telephone Line; Displays, Reports, And Beeps - Konica Minolta Fax 9930 User Manual

Connecting to the Second Telephone Line

1 The primary / first telephone line is connected to the LINE
(1).
See "Installation, Setting Up Your Machine, Connecting
to the Telephone Line."
2 The second telephone line is connected to the second line
jack [dual line access] (2).
3 Insert the other end into the wall jack for the second
telephone line.
1
|
184 Konica FAX 9930

Displays, Reports, and Beeps

The display usually shows the status of the first telephone
line. Press HELP to display the status of the second
telephone line.
The end of a communication (a fax is sent or received) is
indicated by a beep. Any beeps are for the line (first or
second) being displayed. No beeps sound for the line not
being displayed.
Continuous Tone, Speed Access no. 63 must be set to ON if
you want to know when the second line is active. The
second line does not have a separate audible alarm.
When looking at a report, any information related to the
second line is marked with a "#" symbol.
2