Sending Data To A Server (Webdav); Webdav - Konica Minolta bizhub C550 User Manual

Scanning
2.9

Sending data to a server (WebDAV)

WebDAV

The WebDAV operation can be used in a network environment that contains
a server compatible with WebDAV. The scan data can be sent to a folder
specified on the server of the network.
Destinations can be selected using any of the following methods. In addition,
the methods can be combined, for example, by selecting a recipient from a
group destination, then adding other destinations through direct input.
Transmission may not be possible if the document name is too long accord-
ing to the destination server conditions. Since the document name is used
during transmission, consult your network administrator when specifying the
document name.
Destinations can be selected for WebDAV operations using any of the follow-
ing methods. For details, refer to the corresponding section.
Selection method
Selecting from the address book
Entering addresses directly
Selecting a group destination
Selecting a destination that was searched for
!
Detail
If a mail server is available in the network environment, the e-mail notifi-
cation function can be used to send notifications that jobs are completed.
For details, refer to "URL Notification Setting" on page 2-126.
If a proxy server is available in the network environment, a WebDAV serv-
er on the Internet can be accessed through the proxy server.
For an overview of WebDAV transmissions, refer to "Scan to WebDAV"
on page 1-7.
C550
2
Page reference
p. 2-58
p. 2-60
p. 2-38
p. 2-43
2-63