Limiting Access To Destinations; Specifying Limited Access Settings - Konica Minolta bizhub C550 User Manual

Specifying Utility mode parameters
3.6

Limiting Access to Destinations

Limiting Access to Destinations
Limits can be placed on the destinations that appear for each user that is ac-
cessing them, for example, when user authentication settings have been ap-
plied. This allows a group and level to be specified for the address book
destination and settings to be specified for applying limits to registered des-
tinations.

Specifying limited access settings

Level settings can be specified for registered address book destinations,
group destinations and Fax/Scan program destinations.
!
Detail
The level for a registered destination is "0".
The level and group cannot be set to level higher than the level specified
for the user who is logged on.
In order to specify a group for a destination, the group must first have
been registered in Administrator mode. For details on the access permis-
sion groups, refer to the User's Guide [Copy Operations].
1
Log on as a user with a level that allows settings to be specified.
2
Press the [Utility/Counter] key.
3
Touch [One-Touch/User Box Registration].
4
Touch [3 Limiting Access to Destinations].
C550
3
3-39