Ftp - Konica Minolta bizhub C550 User Manual

Specifying Utility mode parameters
Note
The registration cannot be completed if no settings are specified for
"Name", "Host Address" and "File Path".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.

FTP

Settings can be specified for the following for the FTP destination to be reg-
istered.
Parameter
No.
Name
Host Address
File Path
User ID
Password
anonymous
PASV
Proxy
Port Number
Index
Icon
1
Touch [1 Address Book (public)] in the Create One-Touch Destination
screen.
– For details on displaying the Create One-Touch Destination screen,
refer to "Displaying the Create One-Touch Destination screen" on
page 3-4.
C550
Description
Type in the registration number (between 1 and 2000) for the address book
destination. If nothing is entered when [OK] is touched, the destination is reg-
istered with the lowest available number.
Type in a name of 24 characters or less for the registered destination.
Type in the host address in the format of a host name, IPv4 address or IPv6
address.
For a host name, type in 63 characters or less.
Type in 96 characters or less for the path to the saved file.
Type in 47 characters or less for the user ID for logging onto the host compu-
ter.
Type in 31 characters or less for the password for logging onto the host com-
puter.
To specify no user ID for logging onto the host computer, touch [ON].
Select whether or not the PASV mode is used.
Select whether or not a proxy server is used.
Type in the port number. (Range: 1 to 65535)
Select the index characters. For frequently used destinations, touch [Fa-
vorites] so that the destination can be found more easily.
Select an icon.
3
3-22