Konica Minolta bizhub C550 User Manual page 101

Scanning
4
To specify advanced settings, touch [Detailed Settings], and then
specify the settings.
5
Touch [OK], and then touch [OK] in the next screen that appears.
6
Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to "Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)" on page 2-75.
7
Load the document into the ADF or place it on the original glass.
8
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to "Sending after previewing" on page 2-20.
9
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.
C550
2
2-62