Removal Of Electrical Parts Box - Daikin Skyair FHC35K Service Manual

For R(Y)71K
6.4

Removal of Electrical Parts Box

Procedure
Step
∗Remove the top plate, front casing
and side casing according the
procedure for removing the
external casing, etc.
1 Remove the discharge pipe,
heat exchanger and air
thermistor. (If not removing,
disconnect the connector
from the PC board.)
1) Remove the discharge
pipe thermistor.
2) Remove the heat
exchanger thermistor.
184
Warning Be sure to turn off all power supplies before disassembling work.
Procedure
<In case of cooling only model>
<In the case of heat-pump units>
Points
If the lead wire is clamped by the
piping, etc., remove the clamp.
Removal Procedure
Si-71A