Si-71A
3.4
Removal of Fan Motor
Procedure
Step
1.
Removing fan motor
a. Disconnect connector
b. Remove lead wire
retaining plate
2.
Remove screws for
mounting fan motor.
∗FUY71FJV1 :
Three screws
∗FUY100/125FJV1 :
Four screws
3.
Remove motor by pulling
down.
Removal Procedure
Warning
Be sure to turn off all power supplies before disassembling work.
Procedure
For FUY71/100/125FJ
Poins
Caution
∗Fan motor can be removed without
removing the lead wire retaining plate.
However, when washing the heat
exchanger, this plate should be
removed and protect the lead wires.
157