Si-71A
1.7
Removal of Horizontal Vane
Procedure
Step
1
Locate 9 screws on the
decoration panel under the
seal materials.
2
There are 23 other screws.
3
Remove the 18 screws on
the swing motor side and on
the opposite side to open the
covers.
Removal Procedure
Warning
Be sure to turn off all power supplies before disassembling work.
Procedure
For FHYC71K
Points
∗Remove seal materials in the
following sequence. d→f,c→e
∗Number of screws
No. of screws
Seal material c : 7 pcs
Seal material d : 9 pcs
Seal material e : 7 pcs
Seal material f : 9 pcs
Total : 32 pcs
133